TIG 205P-Multi voltage
Multi voltage pulse TIG :1PH&3PH 160V-460V | ||||
IGBT full bridge inverter ; | ||||
IGBT full bridge inverter circuit, high efficiency ; | ||||
4 modes: MMA , TIG , Pulse TIG and cold welding ; | ||||
With accurate current preset function ; | ||||
with HF start and lift ARC start ,100% arc initiation rate. | ||||
with 2T ,slope 2T , 4T , repeat 4T ,spot welding to fulfill different technical requirement . | ||||
With remote control function ; | ||||
With ARC voltage display function , | ||||
With gas check function ; | ||||
with VRD function to ensure operation safety ; | ||||
With Anti-stick funciton at MMA mode ; | ||||
With adjustable ARC start and ARC force.cellulose electrode applicable . | ||||
Parameters | TIG 205P | |
Rated Input Voltage(V) | 1-220V | 3-380V |
Power Frequency(Hz) | 50/60 | |
Rated Input Current(A) | 20(TIG) 30(MMA) | 10(TIG) 12(MMA) |
Rated Input Power(KVA) | 4.4(TIG) 6.8(MMA) | 6.5(TIG) 7.9(MMA) |
Rated No-load Voltage(V) | 77 | 68 |
Rated Duty Cyvle%(40℃) | 60 | 30 |
Gas Pre-flow Time(S) | 0~0.5 | |
Initial Current(A) | 15~160 | 15~200 |
Current Up Slope Time(S) | 0~10 | |
Welding Current(A) | TIG:15~160 MMA:15~160 | TIG:15~200 MMA:15~200 |
Peak Current(A) | 15~160 | 15~200 |
Base Current(A) | 15~160 | 15~200 |
Pulse Width(%)/ Cold Welding time(ms) | 1~99/1~800 | |
Pulse Frequency(Hz)/ Cool welding interval time(S) | 0.2~10/0.1~5 | |
Current Down Slope Time(S) | 0~10 | |
Finish Current(A) | 15~160 | 15~200 |
Gas Post-flow Time(S) | 1~10 | |
Arc start Current(A) MMA | 0-100 | |
ARC Forced Current(A)MMA | 0-50 | |
Arc start Time(S) | 0.1-5 | |
Efficiency | ≥85% | |
Insulation Grade | F | |
Protection Class | IP21S | |
Dimensions(mm) | 530*250*430 | |
Weight(kg) | 15.5 |